Intermediate Position 2/Tilt Position - Selve commeo Timer BT Mode D'emploi

GB
Explanation of functions/terms used
6.2. Intermediate position 2/tilt position
In roller shutter operation the intermediate position 2 is a free settable
position which can be called up via double tap on the UP button.
When the commeo Timer BT will be operated in the blind profile, this
position will be interpreted as changing position. The changing is the
distance between the lower end limit position and the here set posi-
tion. This distance will be interpreted as changing and will be added
as opposite direction when calling up the intermediate position 1. This
possibility provides an automatic slat setting when calling up inter-
mediate position 1.
Note: For a correct moving to the intermediate position 2/changing
position the runtime of the construction must be set correctly!
Set intermediate position 2/tilt position
Operation
>3 s
Motor
Move the motor to the lower end position
with the DOWN button.
Push the STOP button and then addition-
ally push the UP button.
Keep both pushed. After 3 seconds, the
programming run starts. Set the position
with the UP and DOWN buttons while
keeping the STOP button pushed.
Releasing the STOP button will save the
position.
44