Klarstein FULL HOUSE 3.0 Mode D'emploi page 73

CLEANING AND CARE
Note: Before cleaning, always pull the plug out of the socket and allow the device to
cool down.
What How
Daily con- 1. Turn the hotplate off.
tamination 2. Spray on a hotplate
on the glass cleaner while the plate is
(fingerprints, still warm but no longer
marks and stains hot.
caused by over- 3. Wipe with a damp cloth
flowing, non- and dry the plate with a
sugary food towel.
and liquids) 4. Turn the hotplate back on.
Spilled food or 1. Turn the hotplate off.
liquids on the 2. Soak the residues.
function keys. 3. Wipe the keys with a
damp cloth, soft sponge or
kitchen towel.
4. Follow steps 2-4 under
"Daily contamination".
Important!
• When the hotplate is
switched off, the "Hot
surface" indicator goes out
even though the hotplate
is still hot. Be careful not to
burn yourself!
• Do not use scouring pads
or abrasives as they may
damage the finish. Check
the package to see if your
cleaning agent is suitable
for ceramic hotplates.
• Do not leave any cleaner
residue on the plate,
otherwise the glass could
tarnish.
• The hotplate may beep,
switch itself off and the
buttons may stop working
while there is liquid on
them. Make sure that the
buttons are clean and dry
before switching the plates
back on.
EN
73