Publicité
Les langues disponibles
Les langues disponibles
•
For uneven surfaces, the front leveling feet can be
aligned.
Before changing the direction of rotation, check that the plug is unplugged and
that the appliance is empty. It is recommended to use a Phillips screwdriver and a
spanner (both not supplied).
1.
Remove the hinge cover from the
screws. Remove the screws and then
the top hinge that holds the door in
place. Lift the door and place it on a
soft surface to avoid scratches.
2.
On the left side, remove the three
cover caps. Two are located on the
refrigerator, one is located on
the door.
3.
Remove the bottom screws,
hinge bracket and the levelling
foot at the bottom left of the
appliance.
4.
Fix the screws, hinge bracket and
the adjusting foot on the other
side of the base.
5.
Carefully put the door in place.
Make sure the door is both
horizontally and vertically aligned
so that the seals are closed on all
sides before fully tightening the
top hinge. Return the hinge and screw
tightly to the top of the appliance.
Replace the cover plate.
6.
Level the appliance using the
adjustable foot.
* Pictures may vary from your purchased model.
DOOR CONVERSION
43
WWW.PRIMO-ELEKTRO.BE
*see note
Publicité
