Publicité
Les langues disponibles
Les langues disponibles
PR133FR / PR134FR / PR135FR / PR144FR / PR145FR
• After installation, let the appliance stand for 3 hours
before turning it on. This will allow the refrigerant
to settle.
• WARNING! Never put this unit on or
near a gas fire or electric fire or in a
place where it could come in contact
with a heat source. There are flammable
materials on the back of the appliance.
• Pay attention to the "fire hazard - flammable mate-
rial" symbol located on the back of the appliance.
• The appliance must not be used with an extension
cord or power strip.
Follow the instructions below to prevent food contami-
nation:
• Opening the door for long periods of time can sig-
nificantly increase the temperature in the appliance's
compartments.
• Clean surfaces that may come in contact with food
regularly. Keep the condensation channel and drain
hole at the back of the appliance clean.
• Store raw meat and fish in suitable containers in the
refrigerator so that it does not come in contact with
or drip on other food.
• If the appliance is left empty for a long time, you
should turn it off, defrost and clean it. Let it dry and
leave the door open to prevent mold from growing
inside the appliance.
• This freestanding appliance should not be built-in.
40
Publicité
