Publicité
Les langues disponibles
Les langues disponibles
PR133FR / PR134FR / PR135FR / PR144FR / PR145FR
1.
Freezer compartment
2.
Cooling compartment
3.
Temperature controller
and lamp
4.
Shelf
5.
Vegetable drawer
6.
Door rack
7.
Adjustable foot
•
Remove all packing material, both inside and outside. Clean the outside of the
unit with a dry cloth. You can clean the inside with a soft, damp cloth.
•
Make sure that air can circulate freely around the refrigerator. The back of the
refrigerator should be at least 13 cm away from the wall.
•
Place the refrigerator on a firm, flat surface.
•
Avoid direct sunlight and heat. Sunlight can damage the outside of the
refrigerator.
•
Heat will cause higher consumption.
•
Avoid excessive humidity. Too much moisture in the air will cause frost to form
too quickly inside the refrigerator.
•
Before connecting the refrigerator to the mains supply, check that the voltage
on the appliance's rating plate matches the voltage at your home. A different
voltage may damage the appliance.
•
The plug is the only way to disconnect the appliance from the power supply,
make sure it is always easily accessible. To disconnect the power supply to the
device, turn off the device and then unplug it.
•
Allow the appliance to operate for 8 hours without food so that the cabinet
cools to the appropriate temperature.
PARTS
2
4
5
INSTALLATION
42
1
3
7
6
Publicité
