cosori CS158-AF-RXB Mode D'emploi page 19

Preset Air Frying Programs
Using a preset is the easiest way to air fry. Presets are programmed with an ideal time and
temperature for cooking certain foods.
1. Preheat your air fryer (see page 17).
2. When your air fryer displays "READY",
add food to the baskets.
3. Select a preset cooking program
(see page 18).
4. Optionally, customise the temperature
and time. You can do this anytime
during cooking.
a. Press Temp/Time
temperature will blink on the
display. Press the
change the temperature
(75°–205°C / 170°–400°F).
b. Press Temp/Time
The time will blink on the display.
Press the + or
the time (1–60 minutes).
Note: To rapidly increase or decrease time or
temperature, press and hold the
5. Press to begin air frying.
6. When using certain presets, the Shake
Reminder will appear halfway through
cooking time. The air fryer will beep 5
times, and "((SHAKE))" will blink on the
display.
a. Take the baskets out of the air
fryer, being careful of hot steam.
The air fryer will pause cooking
automatically, and the display
will turn off until the baskets are
replaced.
b. Shake or flip the food. Be careful not
to press the basket release button.
c. Put the baskets back into the air
fryer.
Note: See Shaking Food (page 21).
once. The
+ or – buttons to
a second time.
– buttons to change
+ or - buttons.
7. The air fryer will beep 3 times when
finished. The display will show:
8. Optionally, press Keep
+ –
or buttons to change the time (1–60
minutes).
9. Take the baskets out of the air fryer,
being careful of hot steam.
10. Remove the inner basket from the outer
basket to serve food. When separating
baskets:
a. Make sure the baskets are resting on
a flat surface.
b. Watch for hot oil or fat collected in
the outer basket. To avoid splashing,
drain oil before replacing inner
basket. [ Figure 3.2
11. Allow to cool before cleaning.
Warm. Press the
]
Figure 3.2
EN
19