Oregon Scientific BARM839 Mode D'emploi page 6

BARM839A: Select the time zone: (P) Pacific, (E)
Eastern, (C) Central or (M) Mountain.
NOTE The language options are English (E), German
(D), French (F), Italian (I), and Spanish (S).
To select display mode:
Press MODE to choose between clock with seconds,
weekday or time zone.
ALARM
To set the buzzer or radio alarm:
1. Press and hold AL SET.
2. Press VOL + / VOL - to set hour / minute.
3. Press AL SET to confirm.
is on.
4. The settings order is: hour, minute, alarm type (buzzer
alarm or radio alarm
5. If radio alarm is selected, press STATION to select
the radio station and VOL + / VOL – to adjust the
volume.
NOTE Make sure the adapter is connected to the unit
in order for the radio alarm to activate.
To activate / deactivate the alarm:
P/N:086L004984-024 REV1
6/64
BARM839_EN_M_REV0++.indd 5
All manuals and user guides at all-guides.com
or indicates alarm
).
Press .
To silence the alarm:
• Press SNOOZE / LIGHT to silence it for 8 minutes.
or will flash to show snooze is enabled.
OR
• Press any other key to turn the alarm off and activate
it again after 24 hours.
NOTE The radio will remain on for 120 minutes if no
key is pressed.
FM RADIO
To play the radio:
1. Press to switch the radio on.
2. Press VOL + / VOL – to adjust the radio volume.
3. Press TUNE + / TUNE – to change radio frequency,
press and hold to enable auto-search for an available
frequency.
NOTE Make sure the adapter is connected to the unit
in order for the radio to work.
To save a radio station:
Press and hold STATION while on a frequency. A total
of 8 stations can be stored.
5
1/15/08 2:04:16 PM