LD Systems LDESUB15AG3 Manuel D'utilisation page 8

SETUP
Thanks to the multifunctional cabinet, the subwoofers of the Stinger G3 Series can be placed both horizontally and vertically. Non-slip rubber rails
provide stability in both cases. To prevent slippage when stacking the subwoofers, recesses are located on the top for the rubber rails. An M20
threaded flange when using a speaker extension tube is located on the top side of the cabinet.
OPTIONAL ACCESSORIES
LDESUB15AG3: Protective Cover
Castor Board
LDESUB18AG3: Protective Cover
Castor Board
TECHNICAL SPECIFICATIONS
Model number:
Product type:
Type:
Low/mid driver dimensions:
Low/mid driver dimensions (mm):
Woofer magnet:
Woofer brand:
Woofer voice coil:
Woofer voice coil (mm):
Amplifier:
RMS:
Peak power:
Frequency response:
Max. SPL (peak):
Protection circuits:
Input impedance:
Input sensitivity:
Controls:
Indicators:
Line inputs:
8
Item No.: LDESUB15G3PC
Item No.: LDESUB15G3CB
Item No.: LDESUB18G3PC
Item No.: LDESUB18G3CB
LDESUB15AG3
PA subwoofer
Active
15"
381 mm
Ferrite
Custom-made
3"
76.5 mm
Class D
450 W
900 W
40 - Low-pass
133 dB
DC, over-current, short circuit, limiter
30 kOhm
0.3 V (RMS)
Main level, mode
On, signal, limit, protect, mode
(80 Hz, 100 Hz, 120 Hz, cardioid)
2
LDESUB18AG3
PA subwoofer
Active
18"
457.2 mm
Ferrite
Custom-made
4"
101.6 mm
Class D
800 W
1600 W
35 - Low-pass
135 dB
DC, over-current, short circuit, limiter
30 kOhm
0.3 V (RMS)
Main level, mode
On, signal, limit, protect, mode
(80 Hz, 100 Hz, 120 Hz, cardioid)
2