Leister UNIPLAN S Instructions D'utilisation page 12

Conformity
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland confirms that this product in
the version put into circulation by us, fulfils the requirements of the following EU directives.
Directives:
Harmonised standards:
Kaegiswil, 14.01.2016
Disposal
Electrical equipment, accessories and packaging should be recycled in an environmentally friendly
way. For EU countries only: Do not dispose of electrical equipment with household refuse!
Technical Data
Voltage
Frequency
Power consumption
Temperature
Air flow
Drive speed
Noise emission level
Welding seam width
Dimensions l × w × h
Weight
Conformity mark
Protection class I
Technical data and specifications are subject to change without prior notice.
Mains voltage cannot be switched over.
12
2006/42
2004/108 (until 19.04.2016), 2014/30 (starting 20.04.2016)
2006/95 (until 19.04.2016), 2014/35 (starting 20.04.2016)
2011/65
EN 12100, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3,
EN 62233, EN 60335-1, EN 60335-2-45, EN 50581
Bruno von Wyl, CTO
V~
230
Hz
W
°C 20 – 620
l/min. max. 300
m/min. 1.0 – 7.5
L (dB)
pA
mm
mm
kg
Andreas Kathriner, GM
UNIPLAN S / UNIFLOOR S
120
50 / 60 50 / 60
2300 1800
20 – 620
max. 250
1.0 – 7.5
67
UNIPLAN S
20 or 30
420 × 270 × 210
11.5
2
1
100
50 / 60
1500
20 – 620
max. 250
1.0 – 7.5
65 65
UNIFLOOR S
420 × 270 × 215
14.0
2
1