Astralpool FLOC SYSTEM Manuel D'installation page 9

The pump:
When the regulation device is stored, it is recommended to pump clean water to rinse the
Then, position the roller holder at 45°, rotating it clockwise.
tube.
These two precautions will facilitate the subsequent reactivation of the unit.
Keep away from frost.
Flow: presence of incoming flow (enslavement by the filter pump).
Alarm Displayed
Level Low
Flow Off
Parameter Error
For system diagnosis carry out the following steps:
Turn off the instrument
•
Hold down the UP and DOWN keys to turn on the instrument.
•
The instrument will display
•
Press the UP or DOWN keys to avoid resetting the default parameters
•
Press Enter to confirm
•
Default Parameters:
Language: English
Set Point: 100%
Advance:
Input Config:
Manual Mode
Set Point Unit: cm
Statistic:(Resets all the parameters)
Calibration: On
Flow: Off
0000137718
Alarms
Description
Low level alarm
Instrument waiting
Parameter Errors
Init. Default
Yes
Init. Default
No
3
/m!
Relay
Relay Alarm Closed
Relay Alarm Open
Relay Alarm Open
rev. 1.0
Solutions
- Press Enter to open the
alarm relay
- Restore product
- Restore Flow
- Press Enter to restore
parameters
7