Publicité
Les langues disponibles
Les langues disponibles
Digital Display Panel
Available only on certain models.
Gas Tank Gauge
Indicator:
The LP Gas Cylinder
has been split up
into 5 equal capacity
measurements,
each of which
measures approximately
20% of the entire
cylinder (approximately
4.2 unds each)
Thermometer
1. Temperature set-up value is from 0-499°C or 32-931°F.
2. When inputting temperature, if the buzzer sounds and LCD display begins to blink please
reset your temperature value ensuring that you have chosen the correct temperature
measurement, and that the temperature is not beyond the ranges shown in point 1.
3. When using the temperature probe always ensure that you are inserting into the thickest
portion of the meat. If the buzzer sounds during use of the temperature probe this will
indicate that either you have reached or gone beyond the set temperature.
The buzzer will sound every 3 seconds.
Set Target Probe Temperature
1. To set target probe temperature, hold down the
set mode.
2. Use the
3. Once complete, the unit will automatically exit the set mode.
Set Timer
1. To set the count down timer, hold down the
set mode.
2. Use the
seconds. The flashing digit is the one you are adjusting.
10
Temperature °C/ °F: to toggle
between Celcius & fahrenheit,
depress this button.
Up Temp / Timer: This
button is used for setting
the temperature variable
the increasing temperature
and timer. To set temperature. Hold
this button down for 3 seconds.
and
to set desired temperature. The
and
to set the timer. The
Power / Backlight: to power the unit
On/Off. To turn the unit off, hold down
the
button for 5 seconds. Also press the
button quickly to turn On/Off the LCD
control panel backlight.
Down Temp / Timer: This button is used
for setting the timer variable and decreasing
the temperature and timer. To set timer,
hold this button down for 3 seconds.
for 3 seconds. This will activate the
is used to switch temperature digits
for 3 seconds. This will activate the
is used to toggle between the minutes and
Start / Stop: To Start
the time function
during cooking or to
stop the time function.
Alsom to reset the timer,
hold down this button.
Publicité
