Publicité
Les langues disponibles
Les langues disponibles
Programming the Playing Order of the Tracks
—–Program Play
You can arrange the order of the tracks to playback while in
stop mode. You can program up to 32 tracks.
Program play is not available to MP3/WMA discs on
this unit
If a track in an MP3/WMA disc is attempted to be programmed, the
track will not be played back, and erased from the stored memory.
On the remote control ONLY:
1
Load CDs.
• If the current playing source is not CD, press CD 6,
then 7 before going to the next step.
2
Press PROGRAM so that "PROGRAM"
appears on the display.
The PROGRAM indicator also lights up on
the display.
• All disc playback is selected automatically.
You cannot select One disc playback for Program play.
• If a program has been stored in memory, the program is
called up.
3
Press one of the disc number
buttons (DISC1, DISC2, and
DISC3) to select the disc
number you want to play.
Disc number
Track number
4
Press the number button(s)
to enter the desired track
number.
5
6
To stop Program play, press 7.
The Program play is canceled and the unit enters All disc
playback.
(The program you have made is stored in memory until you
turn off the unit, eject the carrousel, or erase the program.)
• Program play is also canceled when you press 0.
To use Repeat play (see page 19) for Program play, press
REPEAT after starting Program play.
To modify the program
While in program mode, you can erase the last
programmed track shown on the display by
PROGRAM indicator
pressing CANCEL while the playback is
stopped.
• Each time you press the button, the last programmed track
To add tracks in the program while in stop mode, simply
select the disc numbers and/or track numbers you want to add
by following steps 3 and 4 of the programming procedure.
To check the program while in stop mode, press ¢ /`,
4 / 1 .
• Pressing CD 3 (CD 6 on the remote control) starts
Program step number
To erase the entire program, press 7 while in the program
mode and the Program play is stopped.
• Unplugging the AC power cord or ejecting the carrousel
Such program steps will be ignored and erased from the program.
Program other tracks you want.
• To program tracks from the same disc, repeat step 4 .
• To program tracks from a different disc, repeat steps 3
and 4 .
Press CD 6 .
The tracks are played in the order you have
programmed.
is erased from the program.
The programmed tracks appear on the display in the
programmed (or reverse) order.
Program play from the first track of the program.
will also erase the stored memory.
Turning the power off will not erase the stored
memory.
If you program a track from an empty tray, or a track
number that does not exist on the disc
Continued
18
Publicité
