Publicité
Les langues disponibles
Les langues disponibles
Drain pump
Large food remnants in the rinsing
water not retained by the filters may
block the waste water pump. In this
case:
Disconnect the appliance from the
■
power supply.
Remove the filters. ~ "Filters"
■
on page 37
Scoop out standing water - use a
■
sponge if necessary.
Using a spoon, pry off the pump
■
cover until it clicks, then grip the
cover and pull upward until it
resists and then pull forward.
Check inner compartment and
■
remove any foreign objects.
WARNING
9
Use caution when removing
parts for cleaning as some
debris may be sharp.
Care and Maintenance en-us
Place cover in the original
■
position, press down and engage.
Reinstall filters.
■
The drain pump will not work
Note:
properly if the drain pump cover is
not snapped in completely until it
clicks.
39
Publicité
