Thermador Professional PG304 Instructions D'installation page 17

The backguard must be attached before sliding the
range into the final installed position. A Low Back or
High Shelf backguard must be installed when there is
less than a 12" clearance between combustibles and
the back of the range above the cooking surface. (See
Fig. 2A and 2B on Page 6).
An Island Trim is available for covering the backguard
mounting flanges for island installations, where there
is a minimum of 12" of horizontal clearance between
combustibles and the back of the range. (See Fig. 2B
on Page 6).
The backguard is inserted, as shown in Fig. 14, into
the guide channels on the back of the range. Secure
the backguard with the (4) sheet metal screws pro-
vided.
Chart C: Backguard Kit Model Numbers
Range Model No.
PG304 Included with Range
PG36
PG48
Step 7: Backguard Installation
9" Std. Low Back 12" Low Back
N/A
N/A
FIG. 14
Front of Unit
22" High Shelf
N/A HS30R
LB36R HS36R
LB48R HS48R
15
Backguard
Installed
3-3/4" Island Trim
IT30R
IT36R
IT48R