Black & Decker GK1935T Mode D'emploi page 8

ENGLISH (Original instructions)
Guard against electric shock
Prevent body contact with earthed or grounded surfaces
u
(e.g. metal railings, lamp-posts etc.). Electric safety can be
further improved by using a high-sensitivity (30 mA/
@ 30mS) Residual Current Device (RCD).
Warning! The use of an RCD or other circuit
breaker unit does not release the operator of your
chainsaw from the safety instructions and safe
working practices given in this user manual.
Additional safety instructions
This appliance is not intended for use by persons
u
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do not
u
play with the appliance.
Ensure someone is nearby (but at a safe distance) in
u
case of an accident.
If for any reason you have to touch the saw chain, make
u
sure your chainsaw is disconnected from the mains.
The noise from this product can exceed 85 dB(A).
u
We therefore recommend you take appropriate
measures for the protection of hearing.
Residual risks.
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include:
Injuries caused by touching any rotating/moving
u
parts.
Injuries caused when changing any parts, blades or
u
accessories.
Injuries caused by prolonged use of a tool. When
u
using any tool for prolonged periods ensure you take
regular breaks.
Impairment of hearing.
u
Health hazards caused by breathing dust developed
u
when using your tool (example:- working with wood,
especially oak, beech and MDF.)
Labels on tool
The following pictograms are shown on the tool: :
Warning! To reduce the risk of injury, the user must
read the instruction manual.
8
All manuals and user guides at all-guides.com
O
N
R
C
Features
1. On/off switch
2. Lock-off button
3. Oil cap
4. Front guard/chain brake assembly
5. Chain tension adjustment ring
6. Chain
7. Guide bar
8. Chain sheath
9. Chain adjust locking knob
10. Chain cover assembly
11. Oil level indicator
Assembly
@
@
@
Wear safety glasses or goggles when operating this
tool.
Always wear ear protection.
Do not expose the tool to rain or high humidity.
Always remove the plug from the socket before
inspecting a damaged cable. Be careful not to use
your chainsaw if the cable is damaged.
Directive 2000/14/EC guaranteed sound power.
Chain Brake Off.
Chain Brake On.
Caution: Do not over tighten. Tighten by hand.
Finger tight only.
Warning! Always wear protective gloves when
working on your chainsaw.
Warning! Before performing any maintenance on
power tools, switch off and unplug the appliance.
Warning! Remove the cable tie that attaches the
chain to the chainbar before assembly.