Publicité
Les langues disponibles
Les langues disponibles
2. Safety
2. Safety
WARNING!
Before installation, commissioning and operation, ensure that the
appropriate instrument has been selected in terms of measuring
range, design and specific measuring conditions.
Check the compatibility with the medium of the materials
„
subjected to pressure!
In order to guarantee the measurement accuracy and long-term
„
stability specified, the corresponding load limits must be
observed.
▶
Non-observance can result in serious injury and/or damage to
property.
Further important safety instructions can be found in the individual
chapters of these operating instructions.
2.1 Intended use
These pressure gauges are used for measuring pressure in hazardous areas of
industrial applications.
Classification per European pressure equipment directive
Instrument type: Pressure accessory without safety function
„
Media: Liquid or gaseous, group 1 (dangerous)
„
Maximum permissible pressure PS, see chapter 2.6 "Labelling / safety marks"
„
Volume of wetted parts: 1 l
„
The instrument must only be used with media which are not harmful to the wetted
parts over the entire operating range of the instrument. Any change in the state of
the matter or any decomposition of unstable media is not permitted.
Only use the instrument in applications that lie within its technical performance
limits (e.g. max. ambient temperature, material compatibility, ...).
→ For performance limits see chapter 3 "Specifications".
Suitability for use
Process industry: Chemical industry, petrochemical industry, oil and gas,
„
power generation, water and wastewater technology, machine building and
general plant construction
For measuring locations with increased overload
„
With case filling for high dynamic pressure loads and vibrations
„
(model 433.50)
WIKA operating instructions pressure gauge model 4 per ATEX
EN
5
Publicité
