Stihl BGE 61 Notice D'emploi page 11

Mounting the Suction Tube
2
Shut off the engine.
N
Press down the lock button (1) by
N
inserting a suitable tool through the
opening.
Push lug (arrow) against blower
N
housing and hold it there.
Rotate the intake screen (2) in the
N
direction of arrow as far as the stop
and lift it away.
Line up the arrows (3).
N
Push the suction tube into the intake
N
opening as far as the stop.
BGE 61, BGE 71
5
1
Push the union nut (4) over the
N
intake opening.
Line up the arrows (3 and 5).
N
Rotate the union nut (4) in direction
N
of arrow until the lever (6) engages
audibly on the blower housing.
Lock button (arrow) must engage in
position.
Removing the Elbow
1
Shut off the engine.
N
Press down the lock button (1) by
N
inserting a suitable tool through the
opening.
Rotate the union nut (1) in the
N
direction of the arrow as far as the
stop.
Remove the elbow (2).
N
Removing the Suction Tube
2
1
Shut off the engine.
N
Press down the lock button (1) by
N
inserting a suitable tool through the
opening.
Depress lever (1), rotate the union
N
nut (2) in direction of arrow as far as
the stop and remove together with
the suction tube.
English
2
9