SICEP NI-UN Manuel D'installation page 21

Installer manual
5.6. Status of terminal outputs
Device programming
A blue flashing positioned at + 1.5" and + 4.5" in the case in which the device is
in "TEST and MAINTENANCE". In regular operation with the container closed, this
flashing is omitted.
One flash at +3" to indicate the status of the "Smoke signal" and "Siren" inputs.
The green colour indicates that both inputs are at rest, while red indicates that at
least one input is in alarm. This indication is repeated every 6 seconds.
The led can be disabled by removing the J1 jumper by further reducing energy
consumption.
Additional LED functions are:
ʂ continuous flashing of white color during the sound of the siren.
ʂ continuous red flashing during the smoke test and along with the sound of the
siren.
Reporting type
Regular Device
Communication error
Faulty smoke
generator
Finsh smoke generator
Generic error
Output Finish Smoke
generator
(OUT END)
GND
GND
OPEN
OPEN
GND
NI-UN
Error output
(OUT ERR)
GND
OPEN
OPEN
GND
OPEN
IT EN
21