Internal Battery - Milwaukee 2970-20 Manuel De L'utilisateur

Masquer les pouces Voir aussi pour 2970-20:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Volts .................................................... 18 DC
Battery Type.......................................... M18™
Charger Type.......................................... M18™
Recommended Ambient
Operating Temperature............................ 0°F to 125°F
Recharge only with the charger specified for the battery. For specific
charging instructions, read the operator's manual supplied with your charger and
battery.
Removing/Inserting the Battery
To remove the battery, push in the release buttons and pull the battery pack away from
the tool.
Always remove battery pack before changing or removing accessories.
To insert the battery, slide the pack into the body of the tool. Make sure it latches
securely into place.
Only use accessories specifically recommended for this tool. Others
may be hazardous.
To learn more about the ONE-KEY™ functionality for this tool, please reference the Quick
Start guide included with this product or go to milwaukeetool.com/One-Key. To download
the ONE-KEY™ app, visit the App Store or Google Play Store from your smart device.
ONE-KEY™ Indicator
Solid Blue
Blinking Blue
Blinking Red
Chemical Burn Hazard. This device contains a lithium button/coin
cell battery. A new or used battery can cause severe internal burns
and lead to death in as little as 2 hours if swallowed or enters the
body. Always secure the battery cover. If it does not close securely,
stop using the device, remove the batteries, and keep it away from
children. If you think batteries may have been swallowed or entered
the body, seek immediate medical attention.
An internal battery is used to facilitate full ONE-KEY™ functionality.
To replace the battery:
1. Remove the battery pack.
2. Remove the screw(s) and open the battery door.
3. Remove the old battery, keep it away from children, and dispose of it properly.
4. Insert the new battery (3V CR2032), with the positive side facing up.
Close the battery door and tighten the screw securely.
SPECIFICATIONS
M18™ BATTERIES
ONE-KEY™
Wireless mode is active and ready to be configured via the ONE-
KEY™ app.
Is actively communicating with the ONE-KEY™ app.
Tool is in security lockout and can be unlocked by the owner via the
ONE-KEY™ app.

INTERNAL BATTERY

5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

2971-202973-202974-2048-53-2970

Table des Matières