Milwaukee 2970-20 Manuel De L'utilisateur page 49

2 M18™ WIRELESS MONITOR
1. Insert the USB stick containing the firmware update into the M18™ WIRELESS
MONITOR's USB port.
2. Turn the navigation dial to SETTINGS
3. Turn the navigation dial to the SYSTEM UPDATE option, press the navigation dial to
enter the sub-menu.
4. Select WIRELESS MONITOR and press the navigation dial. The filename of the
update should be seen in this window.
Press the navigation dial when the update file is highlighted in red to begin the update.
5. Read and acknowledge the warning message by selecting OK.
6. A progress indicator will appear showing the progress of the update.
7. A confirmation message will appear when the update is complete, and the system will
reboot.
8. Go to the ABOUT option in the SETTINGS menu to confirm that the firmware revision
numbers have updated.
MTCam_monitor.bin
Update files end with a .bin file extension
Selecting OK will run a firmware update in
the Wireless Monitor. Please do not interrupt
the update process after it has started.
CANCEL
The Wireless Monitor is updating...
58%
The Wireless Monitor will now restart in order to
complete the firmware update.
, press the navigation dial.
SETTINGS
OK
OK
45