Export Job - Milwaukee 2970-20 Manuel De L'utilisateur

2 M18™ WIRELESS MONITOR
4. Press the PICTURE
moment confirming that the image was captured.
At the end of the session, press the RECORD
video file.

2.3.3 EXPORT JOB

The EXPORT JOB allows for the copying of files from the M18™ 500GB CONTROL HUB
INTERNAL DRIVE to the CONTROL HUB THUMB DRIVE.
From within the GALLERY
From the MANAGE JOBS option, under SETTINGS
EXPORTED in one session.
EXPORT JOB from the GALLERY
1. From the GALLERY
2. Use the navigation dial to select EXPORT
3. Use the navigation dial to select the export destination of CONTROL HUB THUMB
DRIVE, press the navigation dial. The progress indicator will appear showing the
status.
CONTROL HUB THUMB DRIVE
3.942GB/29.817GB
4. Wait for the progress indicator to run until completed.
EXPORT JOB from within the SETTINGS menu
1. From the main viewing screen, turn the navigation dial to SETTINGS
navigation dial.
2. Turn the navigation dial to MANAGE JOBS, press the navigation dial.
3. Turn the navigation dial to EXPORT JOB, press the navigation dial.
4. Turn the navigation dial to select the JOB to export, press the navigation dial. The
export destination of CONTROL HUB THUMB DRIVE appears.
5. Press the navigation dial. The progress indicator will show the status.
button to capture an image. The screen will flash red for a
individual files can be exported one at a time.
select the desired video or image.
SETTINGS
Saving "PROJECTNAME".
CANCEL
29
button again to end and save the
entire folders of JOBS can be
, press the dial.
, press the