Profoon TX-250 Mode D'emploi page 22

READ THE MEMORY:
Press or to start reading.
Use buttons or
memory. The rotation number and the
receiving time/date is displayed too.
CALL BACK:
1. leave the handset on the cradle and
use or to look for the number to
be dialed
2. as soon as the required number is on
the display, lift the handset or press
3. the number will be dialed
ERASE
specific numbers
1. leave the handset on the cradle and
press or
be deleted
2. press , the display shows "DEL?"
3. press again to erase the selected
call or press
state
all numbers:
1. leave the handset on the cradle and
press or
memory
2. press and keep this button
pressed until the display shows
"ALL DEL?"
3. press again to erase all calls or
press to return to the idle state
BATTERIES
Not installed or almost empty batteries
are indicated by the flashing batterysym-
bol on the display. Remove the telep-
honeplug from the telephone-outlet and
replace the batteries.
to step through the
to look for the call to
to return to the idle
to start reading the
Do not just throw away empty
batteries but hand them over to
your local depot for chemical
waste.
MAINTENANCE
- Do not locate the telephone in direct
sunlight or in a moist environment.
- Never use chemical cleansers to clean
the cabinet, the cabinet may only be
cleaned with a moist cloth.
- Don't place the TX-250 on furniture with
cellulose based coating; the rubber feet
will leave stains on the cellulose.
- Under certain circumstances the sound
of the TX-250 might be influenced by
electromagnetic fields of electronic devi-
ces like TV, computer or radio transmit-
ters close to the telephone. Relocate the
telephone to gain better results in such
cases.
22