Publicité
Les langues disponibles
Les langues disponibles
9.OPERATION
shown on the left/right switch
Set the Left/right switch to
Set the Left/right switch to
Change the direction of rotation only when the machine is not in operation !
CAUTION! Set left/right switch to center switch Lock position during set up, when changing torque
setting or when tool is idle.
CAUTION! Operating the machine with a low speed for a long time will increase the risk that the
motor will be overheated. To prevent overheating, let the motor cool down regularly ( Stop using
the machine for 15 minutes )
CAUTION: Please support and clamp the workpiece properly. Do not use hand to grip or
clamp the workpiece, it may cause injury.
You can change the speed by operating the speed selector button on the top of machine. The
The tool has an LED light to illuminate the work area and improve vision when working in areas with
The LED light will switch on automatically while the trigger switch is depressed.
The torque setting will help you regulate the driving power when using a screwdriver bit. This will
help to prevent damage to the workpiece
For drilling, set the torque selector to the position indicated by the drill bit symbol
Advice: Always start with the lowest torque setting and increase If necessary.
Left /right switch
Variable speed
LED worklight
Torque setting
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
209
Publicité
