Publicité
Les langues disponibles
Les langues disponibles
FR
8 . CHARGING
ES
Put the battery pack in the charger make sure it is place correctly(+ and -)(until click)
PT
Plug the charger into an appropriate outlet(230V), the red light on the charger will be on.
Slide the battery into the charger, the light on the charger base will turn to red to indicate the
IT
charging process has started.
When charging is completed, the light on the charger base will turn to green. The pack is now
EL
fully charged.
Normally it will take 1 hour to fully charge the battery.
PL
Unplug the plug after charging
Remove the battery pack by pressing release buttons on the pack and by pulling the battery pack
out.
RU
CHARGING A HOT BATTERY PACK
KZ
When using a tool continuously, the battery pack may become hot. A hot battery pack may be
UA
placed directly onto the charger port but charging will not begin until the battery temperature
cools to within acceptable temperature range. When a hot battery pack is placed on the charger,
the charger may indicate the pack is not ready to charge. Please refer to charger operator's manual.
RO
When the battery pack cools the charger will automatically begin charging.
EN
CHARGING A COLD BATTERY PACK
A cold battery pack may be placed directly onto the charger port but charging will not begin until
the battery temperature warms to within acceptable temperature range. When a cold battery pack
is placed on the charger, the charger may indicate the pack is not ready to charge. Please refer to
charger operator's manual. When the battery pack warms to approximately room temperature the
charger.
CHARGING INDICATOR
lights
Four green
lights on
206
Light indicators
status
The battery is at full
capacity
''OK to store''
Publicité
