Ford Pro 80A Manuel D'utilisation page 24

AC Charger / AC Chargeur
2. Fasten the hook on the wall with appropriate screws. 2. Fasten the hook on the wall with appropriate screws.
2. Fasten the hook on the wall with appropriate screws. 2. Fasten the hook on the wall with appropriate screws.
2-1. For finished walls supported by wood studs, use 2pcs screws (#12
tapping or M6 ) .
2-2. The recommend torque is 25 kgf.cm (21.7 lbf·in).
3. Make the holster face up and combine with the hook. 3. Make the holster face up and combine with the hook.
3. Make the holster face up and combine with the hook. 3. Make the holster face up and combine with the hook.
Figure 3-14 Secure the hook
Figure 3-15 Secure the holster
Ford Pro contact info: chargingsupport@fordpro.com and 1-800-34-FLEET
US Customer Support: 800-343-5338
Canadian Customer Support: 800-668-5515
Installation Manual v2.0 / Manuel d'utilisation v2.0
23