Ford Pro 80A Manuel D'utilisation page 14

AC Charger / AC Chargeur
Item Item
Item Item
Wiring Type
Enclosure Level
Impact Resistance
Dimension(H x W x D)
Web Portal
Management
Console Management
Certification
3 Installation 3 Installation
3 Installation 3 Installation
3.1 Before Installation 3.1 Before Installation 3.1 Before Installation 3.1 Before Installation
3.1.1 Safety Check 3.1.1 Safety Check 3.1.1 Safety Check 3.1.1 Safety Check
• Check for transport damages.
• Before connecting the product to the power supply, check that the
power supply voltage and current rating corresponds with the power
supply details shown on the product rating label.
CAUTION: Disconnect the power supply before installing or
repairing the charge point. Fail to do so may result in physical injury
or damage to the power supply system and the charge point.
DANGER: RISK OF SUFFOCATION
Keep any packing materials away from children – these materials
are potential source of danger, e.g. suffocation.
CAUTION: Cord extension sets are not allowed to be used.
The charge point must be installed only by a licensed electrician in
accordance with the provisions of the local electrical industry construction
and should comply with National Electrical Codes and standards.
Before installing the charge point, make sure you have read all of these
instructions in this manual and fully understand its contents.
FCC Part 15.247 (WLAN 2.4GHz)
Ford Pro contact info: chargingsupport@fordpro.com and 1-800-34-FLEET
US Customer Support: 800-343-5338
Canadian Customer Support: 800-668-5515
Installation Manual v2.0 / Manuel d'utilisation v2.0
80A 80A
80A 80A
Hard-wired
NEMA 3R
IK10
14.1"x10.6"x5.5"
Yes
Yes
UL 1998/2231/2594
FCC Part 15B
Energy Star
FCC Part 22/24/27
13