AC Charger / AC Chargeur
CAUTION: If this unit is installed outdoors, the outlet must be rated
for outdoor installation. The outlet must be installed properly to
maintain the proper NEMA rating of the enclosure.
2-5. Lock the conduit on the enclosure. Please refer to the following
torque.
2-6. Reassemble cover and Front cover then Fasten M4 screw.
3.5 Adjust Max. Output
3.5 Adjust Max. Output Current
3.5 Adjust Max. Output
3.5 Adjust Max. Output
Please contact Ford Pro for max output current adjusting.
3. 3. 3. 3.6 6 6 6 Holster Installation
Holster Installation
Holster Installation
Holster Installation
1. Separate the holster from the hook.
1. Separate the holster from the hook.
1. Separate the holster from the hook.
1. Separate the holster from the hook.
Conduit
1 "
35 kgf·cm
Screw
M4
15 kgf·cm
Figure 3-13 Separate the holster
Ford Pro contact info: chargingsupport@fordpro.com and 1-800-34-FLEET
US Customer Support: 800-343-5338
Canadian Customer Support: 800-668-5515
Installation Manual v2.0 / Manuel d'utilisation v2.0
Torque
30.36 lbf·in
Torque
13 lbf·in
Current
Current
Current
22