Trevi CMP 510 DAB Mode D'emploi Et Installation page 12

ENGLISH
POWER SOURCE
BATTERY
Open the battery compartment (15) and insert 4 "C" size batteries (UM-2) taking care to respect the indicated polari-
ties carefully. Replace the exhausted batteries immediately and remove them if you do not plan to use the appliance
for a long time.
AC OPERATION
Connect the power cord to the AC socket (13). Insert the plug into a 100-240V
Do not connect the appliance to electrical outlets other than those indicated.
ON/OFF
1. Press the /FUN (2) button on unit or STANDBY button (17) on remote control to turn ON the unit;
2. Press repeatedly the
radio, FM radio, CD player, USB input and AUX input;
NOTE: In CD, USB or AUX source, if no operation is performed within 15 minutes, the unit will automatically enter STANDBY
mode.
3. Press the /FUN (2) button on unit or STANDBY button (17) on remote control to turn OFF the unit.
VOLUME CONTROL
Use the VOLUME buttons (6) on unit or VOLUME buttons (31) on remote control to increase or decrease the volume.
DAB/DAB+ RADIO
SCAN DAB/DAB+ RADIO STATIONS
1. Select the DAB source using
appear.
When the radio is turned on for the first time, it will automatically scan and store all available DAB stations;
2. If you want to repeat the automatic scanning operation of the available DAB stations, long press ENTER/
key on the unit or SCAN (25) button on remote control;
3. Press the button
various tuned DAB
4. On the desired DAB station, press ENTER/
to start playback;
5. Repeatedly press MENU/INFO (4)
information on the received station.
STORING RADIO STATIONS
To store a radio station, perform the following steps:
1. Tune to the desired radio station;
2. Long press the MENU/INFO (4) button on the unit or MENU (21) button on the remote control to access the DAB
menu;
3. To use the keys
confirm;
4. To use the keys
the unit to confirm and save the radio station;
Repeat this operation for each radio station you want to save. There are 30 memory locations available.
12
/FUN (2) button on the unit or the FUNC button (16) on the remote control to select: DAB+
/FUN (2) on the unit or FUNC (16) button on remote control. The word DAB will
(8) on the unit or the button
stations;
button on the unit or the button
(3) and (8) on unit and select "Preset Store", press ENTER/
(3) and (8) son the unit and select a memory location, press ENTER/
(29) on the remote control repeatedly to scroll through the
(9) button on the unit or the button
INFO (22) on the remote control to display all
CMP 510 DAB
50/60 mains socket.
(27) on the remote control
(9) button on the unit to
(9) button on
(9)