Publicité
Les langues disponibles
Les langues disponibles
8
problems & solutions
If there is an error, an error code will be shown at the displays.
Error code
Cause
E1
Supply voltage is too high.
E2
Supply voltage is too low.
E3/E4
The cooking zone is overheated.
E5/E6
The hob is overheated.
F3/F4
F5/F6
Induction sensor is defect.
F7/F8
F9/FA
Coil temperature sensor is defect.
FC/FD
26
•
English
Solution
Have the installation checked by a qualified electricien.
Have the installation checked by a qualified electricien.
Wait for the temperature of the cooking zone to drop and switch it on
again.
Switch the appliance off and let the cooking zones cool down.
Contact the service department of Inventum.
Contact the service department of Inventum.
Publicité
