Publicité
Les langues disponibles
Les langues disponibles
RESIDUAL HEAT DISPLAY
The residual heat display shows the glass is still too hot to touch around the cooking zone.
After switching off the cooking zone, the corresponding display shows [H]. As soon as the temperature has decreased enough the
[H] indication will disappear.
KEY LOCK
The key lock function is for blocking and setting the hob in a save mode during use. Setting a higher heat setting or other alterations
are not possible. It is only possible to switch the appliance off.
The key lock is activated when the key lock key
[Lo] and the controls are blocked.
TIMER FUNCTION
The timer function can be used in two ways: minute minder timer and cooking zone timer.
Minute minder timer
The minute minder timer is not connected to a cooking zone and can be operated as long as the hob is actively in use.
Press the TIMER key
when the hob is active. The display shows
minute minder timer is between 0 to 99 minutes. If there are no controls touched in 10 seconds, the minute minder time will be
set. The time runs down according to the setting.
When the time is over, a signal sounds and the timer display blinks. The sound signal will stop automatically after 30 seconds or by
operating any key.
To change the timer, press the TIMER key
Cooking zone timer
The cooking zone timer is connected to a cooking zone and can be set separately for each cooking zone. In contrast to the minute
minder timer the cooking zone timer switches off the cooking zone when the set time runs out.
• Switch on the hob and activate a cooking zone.
• Set the heat setting with the + and - key.
• Press on the TIMER key
• Press the TIMER key
for which cooking zone, the cooking zone timer is set.
• Set the desired time with the + and - key.
• 10 seconds after the last control touch, the display will show the time of the cooking zone which runs out first (in case of
programming more than one cooking zone).
To set an extra cooking zone timer, do as follows:
• Activate another cooking zone.
• Set the heat setting with the + and - key.
• Press on the TIMER key
• Press the TIMER key
• Set the desired time with the + and - key.
• 10 seconds after the last control touch, the display will show the time of the cooking zone which runs out first (in case of
programming more than one cooking zone).
When the selected time has runs down, a signal sounds and the timer display shows "_ _". The programmed cooking zone will be
switched off and [H] appears in the display if the cooking zone is hot.
SOUND SIGNAL
When the hob is in operation, the following activities will be signalled by means of a sound signal:
• normal key activation with a short sound signal
• continuous operation of keys over a longer period of time (10 seconds) with a longer, intermittend sound signal.
DISPLAY INDICATION
Indication on the display
/
is pressed. This activation is confirmed by a sound signal. The display shows
again and change the time with the + and - key.
. The display shows
. The timer will now function as a minute minder timer.
again until the corresponding LED blinks to activate the cooking zone timer. The blinking LED indicates
. The timer will now function as a minute minder timer.
again until the corresponding LED blinks to activate the cooking zone timer.
An error has occured. Check the notification according to the table in chapter 8.
Residual heat indication: the cooking zone is still hot.
Place a pan on the active cooking zone or switch it off.
. Set the desired time with the + and - keys. The range of the
Description
21
English
•
Publicité
