Atag VA7113QT Notice D'utilisation page 77

Troubleshooting
Table continued from last page
Problem
The dishes are not dry enough.
34
Possible causes
The Auto Open option is not
activated.
The dishwasher is not fully
loaded.
Rinse aid needs topping up or
dosage is set too low.
The setting TAB is activated and
all-in-one detergent with
insufficient drying effect is being
used.
Action
Activate the Auto Open option.
Fully load the dishwasher.
Top up with rinse aid or increase
the rinse aid dosage level. See
the chapter Settings.
Switch all-in-one detergents or
deactivate the setting TAB and
top up with salt and separate
rinse aid. See Rinse aid in the
chapter Settings.