Atag VA7113QT Notice D'utilisation page 65

Settings
Table continued from last page
Settings
10. Water hardness
Exit
22
Options
0/1/2/3/4/5/6/7/8/9 Adjusting the water softener. Select a setting
depending on the hardness of the water
supply. It is important that this setting is
correct!
German French
water water
hardness hardness
scale scale
0-5°dH 0-9°fH
6-8°dH 10-14°fH
9-11°dH 15-20°fH
12-14°dH 21-25°fH
15-19°dH 26-34°fH
22-24°dH 35-43°fH
25-29°dH 44-52°fH
30-39°dH 53-70°fH
40-49°dH 71-88°fH
50°dH 89°fH
Do not forget to put salt in the salt
compartment after you have set the water
softener to 1 - 9.
For a water supply with a hardness under
6°dH (9°fH), select 0. The water softener is
deactivated and no salt is needed.
To exit the dishwasher's Settings menu,
select Exit and confirm your selection with
the mode selector
Recommended
setting
0
1
2
3
4
5
6
7
8
9
.