Publicité
Les langues disponibles
Les langues disponibles
username username password [encryption-type]
Configuring the Enable Password
Access EXEC Privilege mode using the enable command. EXEC Privilege
mode is unrestricted by default. As a basic security measure, configure a
password.
There are two types of enable passwords:
•
enable password — stores the password in the running/startup
configuration using a data encryption standard (DES)-encryption method.
•
enable secret — stores the password in the running/startup configuration
using a stronger, MD5-encryption method.
Dell Networking recommends using the enable secret password.
•
To access EXEC Privilege mode, create a password.
CONFIGURATION mode
enable [password | secret] [level level] [encryption-
type] password
Creating a Port-based VLAN
The default VLAN (VLAN 1) is part of the system startup configuration and
does not require configuration.
To configure a port-based VLAN, create the VLAN and then add physical
interfaces or port channel (LAG) interfaces to the VLAN.
•
Configure a port-based VLAN (if the vlan-id is different from the Default
VLAN ID) and enter INTERFACE VLAN mode.
CONFIGURATION mode
interface vlan vlan-id
After you create a VLAN, assign interfaces in Layer 2 mode to the VLAN as
needed.
To view the configured VLANs, use the show vlan command in EXEC
Privilege mode.
30
Publicité
