Thermador DWHD760C Serie Mode D'emploi page 14

Using detergents with salt component
D e t e r g e n t w i t h a s a l t c o m p o n e n t
If combined detergents with a salt component are used,
special salt can usually be omitted up to a water
hardness of 21° dH (37° fH, 26° Clarke, 3.7 mmol/l). If
the water hardness is over 21° dH, salt must be used.
Switching off low salt indicator / water
softening system
S w i t c h i n g o f f w a t e r s o f t e n i n g s y s t e m
If the use of combined detergents with a salt component
H
impairs the low salt indicator on the digital display ,
the low salt indicator can be switched off.
Proceed as described under "Setting water softening
• ‹‹
system" and set the value to : . The water softening
system and salt refill indicator are now switched off.
14