Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Step 8: Maintenance
Continuously monitors the battery to determine when
a maintenance charge should be initiated. If the battery
voltage falls below its target threshold, the charger will
restart the Maintenance cycle until voltage reaches its
optimal state and then discontinues the charge cycle. The
cycle between Optimization and Maintenance is repeated
indefinitely to keep the battery at full charge. The battery
charger can be safely left connected indefinitely without
the risk of overcharging.
Charging Times.
The estimated time to charge a battery is shown below.
The size of the battery (Ah) and its depth of discharge
(DOD) greatly affect its charging time. The charge time is
based on an average depth of discharge to a fully charged
battery and is for reference purposes only. Actual data
may differ due to battery conditions. The time to charge a
normally discharged battery is based on a 50% DOD.
Battery Size
Ah
50
75
100
150
200
Approx. Time to Charge In Hours
12V
1.7
2.5
3.3
5.0
6.7
24V
3.3
5.0
6.7
10.0
13.3
Publicité
