Gardeo GFBHT65-22TBSI/C Instructions D'origine page 78

Step 7: Assemble Ball Coupler &
Chain
1.Attach the coupler (#28) to the tow bar by
using hex bolt M12x120 (#43), flat washer
Ø12 (#3) and lock nut M12 (#67).
2.Attach two chains (#41) to the tow bar by
using hex bolt M12x90 (#40), flat washer
Ø12 (#3), lock nut M12 (#67) and thick flat
washer Ø12 (#68).
Step 8: Attach Wheel Fenders
Attach right fender(#72) and left fender(#74)
by using hex bolt M10x30 (#73), flat washer
Ø10 (#97), lock washer Ø10 (#33) and lock
nut M10 (#32).
78