Maintenance And Storage - Gardeo GFBHT65-22TBSI/C Instructions D'origine

MAINTENANCE AND STORAGE

1. Never tamper with safety devices. Check their proper operation regularly.
2. Check bolts and screws for proper tightness at frequent intervals to keep the machine in
safe working condition. Also, visually inspect machine for any damage and repair, if
needed.
3. Before cleaning, repairing, or inspecting, stop the engine and make certain the impeller
and all moving parts have stopped. Disconnect the spark plug wire and ground it against
the engine to prevent unintended starting.
4. Do not change the engine governor settings or over speed the engine. The governor
controls the maximum safe operating speed of the engine.
5. Maintain or replace safety and instruction labels, as necessary.
6. Follow this manual for safe loading, unloading, transporting, and storage of this machine.
7. Never store the machine or fuel container inside where there is an open flame, spark or
pilot light such as a water heater, furnace, clothes dryer, etc.
8. Always refer to the operator's manual for proper instructions on off- season storage.
9. If the fuel tank has to be drained, do this outdoor.
10. Observe proper disposal laws and regulations for gas, oil, etc. to protect the environment.
After performing maintenance, make sure all guards, shields, and safety
features are put back in place. Failure to follow this warning can result in
serious injury.
69