Dometic DSP Serie Instructions De Montage Et De Service page 13

SinePower
7.1 Control elements
No. in
Description
fig. 2
1 Main switch
2 Status LED
3 Fuse
4 Switch
5 Dip switch
EN
Description
0: Switches the device permanently off
I: Switches the device permanently on
II: The device can be switched on or off via a
remote control (accessory)
See chapter "Status indications" on page 18
Protects the inverter from overload.
The fuse can be pressed in again once it has
triggered.
Sets the net configuration
Makes settings on the inverter
See chapter "Configuring the inverter" on
page 19
Technical description
11