Télécharger Imprimer la page

Broan-NuTone CRDEG1 Serie Manuel D'installation, D'utilisation Et D'entretien page 5

Publicité

Les langues disponibles

Les langues disponibles

Operation
Always turn your hood on before you begin cooking to establish an air flow in the kitchen.
Let the blower run for a few minutes to clear the air after you turn off the range. This will help
keep the whole kitchen cleaner and fresher.
Operate the hood as follows:
CRSA1 SERIES
BLOWER SWITCH
I
Turns blower on to LOW speed.
Turns blower OFF.
II
Turns blower on to HIGH speed.
CRSH1 SERIES
BLOWER SWITCH
Turns blower OFF.
I
Turns blower on to LOW speed.
II
Turns blower on to HIGH speed.
NRSL1 SERIES
ON/OFF BLOWER PUSH BUTTON
When blower is OFF, push this button to turn ON the blower at the last selected speed. Push this
button again to turn OFF the blower.
NOTE: If there is no speed selected (all blower speed push buttons up), the blower will not turn ON.
In that case, press on the desired speed level push button to activate the blower.
When blower is ON, change the blower speed by pressing the push button corresponding to the
desired speed: one line for LOW, two lines for MEDIUM and three lines for HIGH speed.
ON/OFF LIGHT PUSH BUTTON
When lights are OFF, push once on this button to turn ON the lights at the last selected setting.
Push this button again to turn OFF the lights.
LIGHT INTENSITY LEVELS PUSH BUTTON
Push this button to change the light intensity (HIGH or LOW).
BLOWER SPEED LEVEL PUSH BUTTONS
LIGHT SWITCH
I
Turns light on in LOW intensity.
Turns light OFF.
II
Turns light on to HIGH intensity.
LIGHT SWITCH
Turns light OFF.
I
Turns light on to LOW intensity.
II
Turns light on to HIGH intensity.
5

Publicité

loading