Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3.2 Remote control commands
112
3.2.2.72. Config.Aux.Set
Config.Aux.Set.Date
Config.Aux.Set.Time
Date and time.
Input format of the date: Year-month-day, two-digit, enter leading zeros.
Input format for the time: Hours:minutes, two-digit, enter leading zeros.
Date and time have to be set with &Config.Aux.Set $G just after entry of the
value.
3.2.2.73. Config.Aux.RunNo
Current sample number.
Set to 0 on power on and initialization. After 9999, counting starts again at 0.
3.2.2.74. Config.Aux.AutoStart
Number of automatic, internal starts.
3.2.2.75. Config.Aux.StartDelay
Start delay time in s. During this time, the data of the preceding determination
are retained.
3.2.2.76. Config.Aux.ResDisplay
Character set for the result display at the end of the determination.
3.2.2.77. Config.Aux.DevName
Name of the instrument for connections with several units. It is advisable to
use only the letters A...Z (ASCII No. 65...90), a...z (ASCII No. 97...122) and
the numbers 0...9 (ASCII No. 48...57) when the function Setup.AutoInfo
(3.2.2.138) is used at the same time.
If a name has been entered, it will be printed out in the result report (full,
short).
3.2.2.78. Config.Aux.Prog
Output of the program version.
The Titrino sends "758.0022" on requests with $Q.
$G
YYYY-MM-DD
hh:mm
0...9999
1...9999, OFF
0...999999
bold, standard
up to 8 ASCII characters
read only
758 KFD Titrino
Publicité
Table des Matières
