Husqvarna TS 148 Manuel D'utilisation page 19

6. Remove the mulch plug in the opposite
sequence.
Introduction
WARNING:
the safety chapter before you do
maintenance on the product.
Maintenance schedule
Maintenance schedule
Product Do a check of the brake
function.
Do a check of tire pres-
sure.
Do a check of the op-
erator presence control
(OPC).
Do a check of the re-
verse operation system
(ROS).
Do a check for loose
fasteners.
Examine the blades for
wear and damage.
Lubricate the product.
Lubrication
Refer to
schedule on page 20 .
Do a check of the bat-
tery level.
Clean the battery and
the terminals.
Clean pieces off the
steering plate. Refer to
To clean the product on
page 21 .
Do a check of the trans-
axle cooling fan.
Make sure that the cut-
ting deck is level.
Do a check of the V-
belts.
2
Examine the blades more frequently if you cut where there is sand and soil.
1947 - 005 - 19.10.2022
Maintenance
Read and understand
Before At inter-
each vals of 8
use hours
X
X
X
X
X
At inter- At inter-
vals of vals of
25 50
hours hours
X
X
2
X
X
X
X
X
X
X
At inter- Each Before
vals of season storage
100
hours
X
X
X
X
X
19