Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
Washer Does Not Operate
• Check if unit is plugged in.
• Check if the electrical wall receptacle is of proper voltage.
• C heck if the circuit breaker needs to be reset or if the fuse needs to be
replaced.
• C heck if the washer is overloaded: load may need to be re-balanced and
clothes may need to be redistributed.
• Check if the lid is open. You may have to close the lid properly.
• T he washer pauses in some cycles. This is normal in delicate cycle, which has
short soak period where your clothes are being soaked for very short period
of time. You will not hear washer operation for that period of time. When the
soak time is over, it will start automatically.
Problems with Water
• N ot enough water coming out: Water faucet may need to be turned on fully.
Water hoses may be tangled up. Straighten up hoses. Check water level
selection, it may need to be readjusted.
• W ater temperature is incorrect: Check your water heater temperature. Hot
water needs to be at a temperature at least 120ºF -140ºF (49ºC - 60ºC). Check
to make sure the inlet hoses are properly connected. (e.g. hot to hot and cold
to cold.
• W ater leaks: This is due to not properly installing drain hose or fill hoses. Your
home drain may be clogged or having constant waster pressure. You may
need to tighten hoses, check the plumbing or call a plumber.
• Water will not drain: This is due to not installing your drain hose properly.
You may need to connect the drain hose properly. Check the position of the
drain hose. In order to drain properly, make sure that top of drain outlet is less
then 4 ft. (1.2m) above the floor.
English
19
Publicité
