ubbink NorthWood 580 Notice De Montage page 8

WARRANTIES - After-sales service
Swimming pool 580 - H130 cm
Warranty conditions:
The swimming pool must be assembled within 48 hours of the package being opened.
For the warranty to be valid, a concrete slab must be in place.
Our warranty covers only the replacement of defective parts. It in no way covers demands for compensation or damages. The general warranty does not apply in the following circumstances:
• Use of the equipment in a way which is not in accordance with the instructions.
• Damage incurred as a result of bad handling during and after assembly.
1) Pump : 2 year warranty (electrical problems) under normal usage conditions. The following are not covered by the warranty: Deterioration by abrasion or corrosion, deterioration due to a faulty connection,
equipment dismantled or repaired by a third party, parts breaking (pump base, prefilter cover, hose connector...), running the pump when dry. The warranty is void if the electrical cable and/or the plug are
replaced, removed or damaged
2) Liner : 2 year warranty under normal usage conditions. The following are not covered by the warranty: Punctures, holes, tears, stains (treatment products directly in the water), stains due to algae growth, stains
due to decomposition of foreign bodies in contact with the liner, stains and decolouration due to oxidising products, colourfastness and wear due to rubbing on various surfaces. Deformation of the liner left without
water for more than 24 hours (never empty your swimming pool completely).
3) Filter : 2 year warranty on non-installed products: tank, drainage plug, collar, multiport valves... The following are not covered by the warranty: Watertightness problems following use of pressure greater than the
maximum authorised pressure. (ref. filter notice).
4) Skimmer : 2 year warranty on the seal joints.
5) Wooden structure : 10 year warranty against corrosion and insect attack. The following are not covered by the warranty: Changes in wood colour due to weather, natural deformations (splitting, cracks which
in no way impair the mechanical performance of the wood). The warranty does not cover assembly or storage faults producing deformations in the wall panels (if assembled a long time after the package being
opened), deformation of the planks which in no way impairs the mechanical performance of the swimming pool.
IMPORTANT : The after-sales service will be available only at point of sale.
Essential records for claiming the warranty: - Till receipt/proof of purchase.
- Warranty slip.
- Reference number of the faulty part.
Shop :
City :
Contact department :
Direct tel :
Code Ref. Désignation
M 7514215 Plank 45 x 145 x 2380 mm
MS 7514216 Upper plank 45 x 135 x 2380 mm
2MS 7514217 Upper 1/2 plank 45 x 67 x 2380 mm
2MI 7514218 Lower 1/2 plank 45 x 77 x 2380 mm
MSS 7514219 Upper skimmer plank 45 x 135 x 2380 mm
MIS 7514224 Lower skimmer plank 45 x 145 x 2380 mm
7504307 Water jet plank 45 x 145 x 2380 mm
MR
PR 7514097 Post 45 x 135 x 1275 mm (reinforcement)
7514114 Sacrifice part 45 x 135 x 280 mm
PF 7514113 L-section finish 28 x 70 x 1260 mm
C 7514048 Console edging 45 x 230 x 170 mm
Wooden stop block for the skimmer flap
7514049
30 x 20 x170 mm
PL 7100201 Pair of rungs for wooden ladder H120/130 cm
T 7514052 Wooden ladder steps/Skimmer flap 28 x 145 x 600 mm
7514062 Pine outer right skimmer edging 28 x 145 x 826 mm
MSD
MSG 7514063 Pine outer left skimmer edging 28 x 145 x 826 mm
MGI 7100220 Pine edging 28 x 145 x 2129 mm Int.
MGE 7100225 Pine edging 28 x 145 x 2253 mm Ext.
7514149 Sandbag (25kg)
R 7514016 Hung 2.06 ml hanging rails
7514750 3-step stainless steel ladder
Poolmax pump
Filter
Flexible pipe, 8m
S Skimmer large
JM Anodised aluminium joint
Ground protection felt
Protective felt for wall
NOTICE 580 - H130-2015_2.indd 9
Client :
Address :
City :
Tel :
Qty Qty
7514696
parcel ASS
66 Code Ref. BREAKDOWN OF THE HARDWARE KIT
A1 7514516 Console + reinforcer bag
3
A2 7514606 Console + reinforcer bag
4
B 7514270 Cradle cache bag
4
7514616 Hung rails bag
C3
1
DMI 7514553 Edging screw bag
DMP2 7514618 Edging screw bag
1
E 7514145 Skimmer flap bag
1
F 7514620 Aluminium edging joint bag
16
G 7514146 Wooden ladder + finishing profile bag
2
16
16
2
1
5
1
1
8
7
3
8
1
1
1
1
1
8
3
PR
2
8
Hardware kit
1
Qté Qté
parcel ASS
2
3
1
1
1
1
1
1
1
PR
I / 15-1
7514326 Beige 75/100 liner 580 - H130 cm
or
7514234 Blue 75/100 liner 580 - H130 cm
PL
T
1
1
07.12.15 12:52