Replacing The Remote Control Battery - Nikon Lite Touch Zoom 140ED Manuel D'utilisation

Replacing the remote control battery

1. While keeping the battery holder release lever
pressed as the arrow
unit indicates to release the lock, pull out the
battery holder from the remote control unit 2.
2.
Replace the battery.
Use one 3 V lithium (CR2025) battery.
Insert the battery with + polarity side facing up into the battery holder.
3.
Insert the battery holder into the remote
control unit until it clicks closed.
Warning:
Keep the batteries out of the reach of children. If a battery is swallowed,
consult a doctor immediately.
40
Advanced Operations
1
on the remote control