Lindy 38417 Manuel Utilisateur page 5

User Manual
Product Layout
Transmitter
1. Link LED – This LED will illuminate when a link has been made between the transmitter and
receiver unit.
2. Power LED – This LED will illuminate when power is provided to the unit.
3. Display Link LED – This LED will illuminate when the display is connected to the receiver unit and
the transmitter and receiver are connected via fibre cable.
4. Source Link LED – This LED will illuminate when the source device is connected to the
transmitter unit.
5. Optical Out – Once the QSFP module is in place, please connect one end of the required length
of Duplex LC SM fibre cable.
6. DisplayPort In – Connect to the DisplayPort source device using a DisplayPort cable.
Receiver
1. Link LED – This LED will illuminate when a link has been made between the transmitter and
receiver unit.
2. Power LED – This LED will illuminate when power is provided to the unit.
3. Source Link LED – This LED will illuminate when the source device is connected to the transmitter
unit and the transmitter and receiver are connected via fibre cable.
4. Display Link LED – This LED will illuminate when the display is connected to the receiver unit.
5. Optical In – Once the QSFP modules are in place, please connect one end of the required length
of Duplex LC SM fibre cable.
6. DisplayPort Out – Connect to the DP display using a DisplayPort cable.
English