Publicité
Les langues disponibles
Les langues disponibles
W 550
Attention! Never operate the device if the nozzle seal is either damaged or
missing. If the nozzle seal is either missing or damaged liquids can enter
the device and increase the risk of an electric shock.
Slide the nozzle seal (Item 4) with the groove (slot) facing forwards into the nozzle
(Fig. 10 B). Put the nozzle onto the gun body and find the correct position by turning it.
Put the air cap onto the nozzle and tighten it using the union nut.
Place the container seal from below on the suction tube and slide it over the collar, while
turning the container seal slightly. Insert the suction tube with container seal in the gun
body.
14. Maintenance
WARNING! Never operate the machine without the air filter; dirt could be
sucked in and interfere with the function of the machine. Disconnect plug
before changing parts.
•
Change the air filter if it is soiled (Fig. 9).
•
In order to mount the gun more easily apply lubricating grease (enclosed) liberally
to the O-ring at the gun front part. (Fig. 10, Item 5)
15. Spare Parts List
Pos.
Designation
1
Union nut
2
Air cap
3
Nozzle (2.5 mm)
4
Nozzle seal
5
O-ring
6
Material volume regulation with spring, complete
7
Spray gun front part complete incl. 800 ml container
8
Air filter set
9
Air filter cover (right + left)
10
Container seal
11
Suction tube
12
Container with cover
13,14,15 Ventilating hose, valve cover, diaphragm
16
Stir stick
17
Lubricating grease (no fig.)
Spare Parts List (Fig. 10)
GB
Order No.
0417 319
2305 129
2305 131
0417 706
0417 308
0417 910
0417 914
0417 912
0417 303
0417 358
0417 357
0413 909
2304 027
2304 419
2315 539
23
Publicité
