Publicité
Les langues disponibles
Les langues disponibles
6. Tilt adjustment. The inclination of the fan can be adjust
by loosening the two screws "A" located on the sides of the
connection the motor. Tighten the screws.
FUNCTIONING
▶Through the 3-speed system you can start the fan, this system is
designed to give you maximum flexibility. .
• PPOSITION 0: OFF position, no button pressed.
• POSITION 1: first gear
• POSITION 2: second gear
• POSITION 3: third gear
▶The oscillation mechanism is operated by the rotating cam located
under engine:
• Screw in screw "B" in correspondence with the axis of the rotating
cam so that it does not oscillate (Fig. 1).
• Screw in screw "B" in correspondence with the eccentric thread
located on the side of the cam to obtain the oscillation of the fan
(Fig. 2).
IMPORTANT NOTES
▶Place the fan on a flat, dry surface.
▶Before connecting the device to the network, make sure that the
switch is in the "0" position.
▶Plug the power cord into the outlet 220-240V~ 50/60Hz
▶If you do not use the fan for a long time, please unplug the power
cord from the outlet.
▶Never try to disassemble the device where the motor is located.
▶If you notice any abnormality (such as unusual fan noise), turn off
Instruction manual
NOTAS IMPORTANTES
the device and unplug it immediately.
▶Make sure that no objects or liquids enter the interior of the fan
through any openings.
▶The fan should only be used in dry environments.
▶Protect the device from dust, moisture, sunlight and direct heat.
CLEANING AND MAINTENANCE
▶Make sure the appliance is unplugged before cleaning.
▶Clean with a soft damp cloth, without detergent, aggressive liquids
or solvents.
▶Do not immerse the fan in water or any other liquid.
▶If the fan is not going to be used for a long period of time, protect it
and store it, or after cleaning it, in a dry place.
Ref. 33918
ES
PT
EN
FR
Publicité
