Publicité
Les langues disponibles
Les langues disponibles
FEATURES
ES
▶Power: 180W
▶Speeds: 3 levels
▶Operating temperature: 5-40 ° C
PT
▶Fixed or oscillating position
▶66cm grid
▶Metallic structure
EN
▶Adjustable height
PARTES DEL VENTILADOR
1. Front grille
FR
2. Rear grill
3. Telescopic rod
4. Ring
5. Fixed rod
6. Side flaps
7. Engine
8. "OFF-1-2-3" switch
9. Blades
10. Base
Instruction manual
ASSEMBLY INSTRUCTIONS
1. On the first use of the appliance, remove it from the
packaging and make sure that all components indicated on
the previous pages of this manual are present. If not, consult
your dealer.
2. Insert the fixed rod (5) into the base (10) and fix it by
screwing the four screws already located at the base.
3. Fix the motor (7) to the telescopic rod using the nut (13)
and the bolt (14).
4. Fix the rear grill (2) on the plate (P) screwing the four
screws (15). Make sure that the screw hole security stay
targeted down.
5. Secure the blades by locking them in correspondence with
the slot of the rod (16). Check that the blades can rotate
freely.
Ref. 33918
Publicité
