Publicité
Les langues disponibles
Les langues disponibles
ABS mounting inserts
lower mounting bracket
(set desired angle before
completing mounting)
loosely fi ll the enclosure with poly-fi l, the
white protective layer in the packaging.
The KMTES will use one sheet for a
woofer and one-half sheet for a horn.
mount speaker to enclosure
(recommend M4 or #8 screws)
remove inner screws from back of
enclosure to orient back plate.
stainless steel socket-head cap
screws (1/4" Allen wrench)
upper mounting bracket
upper gasket
lower gasket
attach wiring to outer speaker terminals
LED wire port
attach soldered wiring from inner
terminals to speaker terminals,
keeping in mind the polarity of each.
3
Publicité
