Publicité
Les langues disponibles
Les langues disponibles
Step 5:
Place the fountain top (11) upright
onto the fountain basin.
Step 6:
Clip the hoop ring (10) on three
bumps and then clockwise until
the parts are secured together.
Step 7:
Insert the wind glass (12) into
the top of the body (4).
12
Assembly Instructions of Fire Table
Step 1:
Check each part before using the product.
Make sure the gas supply system is turned "OFF" before assembling.
Step 2:
Tighten the pressure
reducing valve QCCI and the
cylinder valve to ensure that
there is no gas leakage.
Connect the pump plug and
socket to ensure that the
power supply is 120V60HZ.
13
Publicité
